Product Specifications - ZyXEL Communications MSC1000G User Manual

This appendix gives details about the IES default settings and MSC hardware and features.
39.1 IES Default Settings
This table lists major default settings.
Table 393 Default Settings
Default In-band IP Address
Default In-band Subnet Mask
Default Out-of-band IP Address
Default Out-of-band Subnet Mask
Default User Name
Default Password
Default Console Port Settings
VLAN Default Settings
One VLAN is created (this is also the management VLAN).
VID
Registration
Tagging
STP Default Settings
Enable/Disable State
STP Version
Operational Mode:
ADSL Profile Default Settings
Name:
Latency Mode
Maximum Rate
Minimum Rate
Interleave Delay
Maximum Signal to Noise Ratio
Minimum Signal to Noise Ratio
Target Signal to Noise Ratio
Rate Adaptation Mode
Up Shift Margin
Management Switch Card User's Guide
C
HAPTER

Product Specifications

192.168.1.1
255.255.255.0 (24 bits)
192.168.0.1
255.255.255.0 (24 bits)
admin
1234
VT100 terminal emulation, 9600 bps, No parity, 8 data bits, 1 stop bit,
and no flow control
1
Fixed for the Ethernet and ADSL ports
Untagged for all ports
Disabled
MSTP
auto
DEFVAL
Interleave
Upstream ADSL Settings:
1000 Kbps
32 Kbps
20 ms
31 db
6 db
12 db
Startup
15 db
3 9
Downstream ADSL Settings:
24000 Kbps
64 Kbps
20 ms
31 db
6 db
12 db
Startup
15 db
1115