Table of Contents
Advertisement
4 Configuration
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
From DSCP value / To DSCP value: Specify the range of DSCP values.
Class ID: Specify the priority queue for the switch. The value is from 0 to 3.
Click Apply to implement changes made.
QoS > Priority Settings
The Priority Setting page allow users to configure the CoS priority settings on a port or ports. When CoS
tagged packets arrive on the switch, they are mapped to the settings configured here. For example, if a port
has been assigned a MAC priority, the packet that has the CoS priority assigned to a MAC address will be
sent to the CoS queue configured for that MAC address. Once the configuration has been completed, users
may see the results in the Priority Settings Table seen here. After configuring the port priorities, users may
adjust the individual CoS settings on the other windows located in the CoS folder of the Switch.
Figure 4.118 - QoS > Priority Settings
From Port/To Port: Users may select a port or group of ports to assign the priority settings.
Port Priority: Specify the Port Priority is Off or On on the port.
Ethernet Priority: Specify the Ethernet Priority is Off or 802.1p on the port.
IP Priority: Specify the IP Priority is Off or DSCP on the port.
Click Apply to implement changes made.
RMON > RMON Basic Settings
Users can enable and disable remote monitoring (RMON) status for the SNMP function on the Switch. In
addition, RMON Rising and Falling Alarm Traps can be enabled and disabled. Click Apply to make effects.
Figure 4.119 - RMON > RMON Basic Settings
RMON > RMON Ethernet Statistics Configuration
The RMON Statistics Configuration page displays the information of RMON Ethernet Statistics and allows
the user to configure the settings.
Figure 4.120 - RMON > RMON Ethernet Statistics Configuration
The RMON Ethernet Statistics Configuration contains the following fields:
76
Advertisement
Table of Contents
