Dhcp Server Screening; Dhcp Server Screening Global Settings - D-Link DGS-1510 Series Web Ui Reference Manual

Gigabit ethernet smartpro switch
Hide thumbs Also See for DGS-1510 Series:
Table of Contents

Advertisement

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

DHCP Server Screening

This function allows users to not only to restrict all DHCP server packets but also to receive any specified
DHCP server packet by any specified DHCP client. It is useful when one or more DHCP servers are
present on the network and both provide DHCP services to different distinct groups of clients.
The first time the DHCP filter is enabled it will create both an access profile entry and an access rule per
port entry, it will also create other access rules. These rules are used to block all DHCP server packets. In
addition to a permit DHCP entry it will also create one access profile and one access rule entry the first
time the DHCP client MAC address is used as the client MAC address. The Source IP address is the
same as the DHCP server's IP address (UDP port number 67). These rules are used to permit the DHCP
server packets with specific fields, which the user has configured.
When DHCP Server filter function is enabled all DHCP Server packets will be filtered from a specific port.

DHCP Server Screening Global Settings

This window is used to view and configure the DHCP server screening global settings.
To view the following window, click Security > DHCP Server Screening > DHCP Server Screening
Global Settings, as shown below:
The fields that can be configured for Trap Settings are described below:
Parameter
Trap State
Click the Apply button to accept the changes made.
The fields that can be configured for Profile Settings are described below:
Parameter
Profile Name
Client MAC
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Figure 9-59 DHCP Server Screening Global Settings window
Description
Select to enable or disable the DHCP server screening trap here.
Description
Enter the DHCP server screening profile name here. This name can be
up to 32 characters long.
Enter the MAC address used here.
317

Advertisement

Table of Contents
loading

Table of Contents