Cpu Protect Sub-Interface; Cpu Protect Type - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Protocol Name
Click the Clear button to clear the information based on the selections made.
Click the Clear All button to clear all the information in this table.

CPU Protect Sub-Interface

This window is used to view and configure the CPU protection sub-interface settings.
To view the following window, click Security > Safeguard Engine > CPU Protect Sub-Interface, as
shown below:
The fields that can be configured for CPU Protect Sub-Interface are described below:
Parameter
Sub-Interface
Rate Limit
Click the Apply button to accept the changes made.
The fields that can be configured for Sub-Interface Information are described below:
Parameter
Sub-Interface
Click the Find button to locate a specific entry based on the information entered.

CPU Protect Type

This window is used to view and configure the CPU protection type settings.
To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below:
CPU protect related counters of sub-interfaces.
Select the protocol name option here. Options to choose from are
DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6-Other,
IGMP, LACP, SNMP, SSH, STP, Telnet, TFTP, Web, 802.1X, and All.
Figure 9-79 CPU Protect Sub-Interface window
Description
Select the sub-interface option here. Options to choose from are
Manage, Protocol, and Route.
Enter the rate limit value used here. This value must be between 0 and
1024 packets per second. Tick the No Limit option to disable the rate
limit.
Description
Select the sub-interface option here. Options to choose from are
Manage, Protocol, and Route.
340