Figure 6-4
Upload Command Screen
Reboot
Use the Reboot tab to save configuration changes (if any) and reset the AP-600. Entering a value of 0 (zero) seconds
causes an immediate reboot. Note that Reset, described below, does not save configuration changes.
!
& $ 8 7 , 2 1
& $ 8 7 , 2 1
& $ 8 7 , 2 1
& $ 8 7 , 2 1
Rebooting the AP-600 will cause all users who are currently connected to lose their connection to the network
until the AP-600 has completed the restart process and resumed operation.
Figure 6-5
Reboot Command Screen
Commands
79