Access Point's Ip Address - Proxim Harmony 8550 Manual

The <Reboot> button is described at the end of this chapter. The <Configure>,
<Status>, and <Statistics> buttons are described in Chapters 5 through 7.
Note:
Close all instances of the computer's Web browser to exit from the Harmony
Access Point Management tool.

Access Point's IP Address

You can configure the Access Point's IP address in one of three ways:
G The Access Point can receive a dynamic IP address from a network DHCP
(Dynamic Host Configuration Protocol) server.
G The Access Point is assigned a default IP address of 169.254.x.y at the factory.
This IP address is printed on the underside of the unit along with its serial
number and physical (or MAC) address. The Access Point will use this IP
address if a DHCP server is not present on the network.
G The Access Point can be assigned a static IP address via the Harmony Access
Point Management tool.
31