Hardware Specifications
This chapter covers the hardware specifications of the following products:
•
ORiNOCO® AP-800 and AP-8000
•
ORiNOCO® AP-8100
3.1 ORiNOCO® AP-800 and AP-8000
Category
Radio Module
Wireless Protocol
Frequency
Channel bandwidth
Modulation
Device Interface
LED Indicators
Antennas
Network Architecture Type
Transmit Power
ORiNOCO® 802.11n Access Points - Hardware Installation Guide
Single Radio Access Point (AP-800) / Dual Radio Access Point (AP-8000)
3x3 MIMO per radio
802.11a/n
802.11a
802.11g/n
802.11g
5.150 - 5.850 GHz*
2.4 - 2.483 GHz*
* Subject to Individual Country Regulations
20MHz and 40MHz for 802.11n
20MHz for 802.11a/b/g
•
MCS0 - MCS15 for 802.11n (6.5 Mbps -300 Mbps)
•
BPSK, QPSK, 16-QAM and 64-QAM for 802.11a and 802.11g (6 Mbps - 54 Mbps)
•
DSSS for 802.11b (1 Mbps -11 Mbps)
Ethernet: Auto-sensing 10/100/1000BASE-T Ethernet
Antenna Connector: 3 RP-SMA connectors for AP-800
6 RP-SMA connectors for AP-8000
Step 5: View LEDs
Refer
3 Single-Band (AP-800) / 6 Dual-Band (AP-8000) Omni-Antennas and reverse SMA connector
with 3 dBi gain.
Infrastructure
Operational
802.11b
802.11a/g
802.11na/ng
* Combined Tx Power values
Specification
Transmit Power*
Modes
(dBm)
20 MHz
19
17
16
40 MHz
-
-
14
3
22