Network Features; Hardware Specifications - Proxim ORiNOCO AP-8000 User Manual

Specifications

Hardware Specifications

Network Features

System Logging (Syslog)
RADIUS Accounting Support*
DHCP Client
TCP/IP Protocol Support
Hardware Specifications
Category
Radio
Wireless Protocol
Frequency
Channel bandwidth
RF Modulation
Device Interface
Network Architecture
Type
Transmit Power
Receive Sensitivity
Antennas
Local Configuration
Support
Message
Authentication
Intrusion detection
Feature
• Dual Radio Access Point with integrated radios: 802.11a/b/g/n + 802.11a/b/g/n
• 3x3 MIMO
• 802.11n draft 2.0
• 802.11a
• 802.11b
• 802.11g
• 5.15 - 6.075GHz*
• 2.4 - 2.483 GHz*
* Subject to Individual Country Regulations
• 20MHz and 40MHz for 802.11n
• 20MHz for 802.11a/b/g
• MSC0 - MCS15 for 802.11n (6.5Mbps -300Mbps)
• BPSK, QPSK, 16-QAM and 64-QAM for 802.11a and 802.11g (6Mbps - 54Mbps)
• DSSS for 802.11b (1Mbps -11Mbps)
Ethernet: Auto-sensing 10/100/1000BASE-T Ethernet
Antenna Connector: 3RP-SMA connector per radio
Infrastructure
For 2.4 GHz: 19dBm*
For 5 GHz: 17dBm*
* Varies with modulation scheme
For 2.4 GHz and 5 GHz: -75dBm*
* Varies with modulation scheme
6Dual-Band reverse SMA connector Omni-Antenna with 3 dBi gain
RS-232 Serial port, DB9 Female
• 802.11i AES message authentication with 128 bit keys
• TKIP with 128 bit Michael Message Integrity Check
Detect MIC intrusion attacks
Supported by AP-8000 (Y/N)
Y
Y
Y
Y
Specification
AP-8000 User Guide
159