Install Software Using Tftp Server - Proxim ORiNOCO AP-8000 User Manual

Installation and Initialization
Installing the Software
Figure 2-17 File Download Page
5. Select an appropriate filename and location and click Save.
Retrieve From Device Using TFTP
Use the TFTP Upload to upload files from the AP to the TFTP server. The TFTP server must be running and configured
to point to the directory to which you want to copy the uploaded file. We suggest you assign the file a meaningful name.
If you don't have a TFTP server installed on your system, install the TFTP server from the installation CD. You can either
install the TFTP server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD's Xtras/SolarWinds
sub-directory.
In the TFTP Upload page enter the following TFTP information as described below:
Figure 2-18 Retrieve From Device Using TFTP
• Server IP Address: Enter the TFTP server IP Address.
– Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server.
• File Name: Enter the name of the file to be uploaded.
• File Type: Select the type of the file to be uploaded: Config file or Event Log.
Click Retrieve to initiate the procedure.

Install Software Using TFTP Server

A Trivial File Transfer Protocol (TFTP) server allows you to transfer files across a network. You can upload files from the
AP for backup or copying, and you can download the files for configuration and AP Image upgrades. The Solarwinds
TFTP server software is located on the AP Installation CD-ROM. You can also download the latest TFTP software from
Solarwind's Web site at http://www.solarwinds.net. The instructions that follow assume that you are using the Solarwinds
TFTP server software; other TFTP servers may require different configurations.
AP-8000 User Guide
25