File Management; Upgrade Firmware; Update Firmware Using Http; Update Firmware Using Tftp - Proxim Edge MP-1035-CPE Device Management Manual

V2
Hide thumbs Also See for Edge MP-1035-CPE:
Table of Contents

Advertisement

Upgrade the bandwidth using the license file (.bin extension) generated above. For more details, refer

5.2 File Management

The File Management tab enables you to upgrade the firmware and configuration files on the device, and retrieve
configuration and log files from the device through Hypertext Transfer Protocol (HTTP) and Trivial File Transfer Protocol (TFTP).
HTTP file transfer can be performed with or without TLS enabled. HTTP file transfer with TLS requires enabling Secure
Management and Transport Layer Security. HTTP file transfer by using TLS may take extra time.
TFTP file transfer requires that a TFTP server is running and configured to point to the desired directory path to copy
the retrieved file.

5.2.1 Upgrade Firmware

You can update the device with the latest firmware either through HTTP or TFTP.
:
• Make sure that the firmware which you are loading is compatible with the device which is being upgraded.
• It is recommended to upgrade the remote end(s) first and then the local end.

5.2.1.1 Update Firmware Using HTTP

To update the firmware using HTTP, follow the below steps:
1. Navigate to Management > File Management > Upgrade Firmware > HTTP.
2. In the HTTP screen, click Choose File to select the updated firmware file from the desired location.
3. To upgrade the device with new firmware click Upgrade and then reboot the device.
: The file name should not contain any spaces or special characters.

5.2.1.2 Update Firmware Using TFTP

To update the firmware using TFTP, follow the below steps:
1. Navigate to Management > File Management > Upgrade Firmware > TFTP.
2. Based on the IP mode, configure either IPv4 or IPv6 address as TFTP Server address.
3. Enter the name of the latest firmware file (including the file extension) in the File Name box that you want to load
onto the device.
4. To upgrade the device with new firmware, click Upgrade and then reboot the device after the firmware upgrade has
finished or click Upgrade & Reboot.
:
After upgrading the device with the new firmware, reboot the device; otherwise, the device will continue to run
with the old firmware.
It is recommended not to navigate away from the screen while the upgrade is in progress.
Device Management Guide
Device Management
Upgrade
License.
28

Advertisement

Table of Contents
loading

Table of Contents