Show Address_Binding - D-Link DGS-3200 SERIES Cli Manual

Restrictions
You must have administrator privileges.
Examples
To config an address binding entry :
D G S - 3 2 0 0 - 1 0 : 4 #config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-11
Success.
D G S - 3 2 0 0 - 1 0 : 4 #

39-5 show address_binding

Purpose
To display address binding entries, blocked MAC entries, and port status.
Format
show address_binding [ip_mac {all| ipaddress <ipaddr> mac_address <macaddr> }|blocked {all|
vlan_name <vlan_name> mac_address <macaddr>} |ports]
Description
This command is used to display address binding information.
Parameters
Parameters
ip_mac
blocked
ipaddr
macaddr
vlan_name
ports
.
Restrictions
None.
Examples
To display the address binding global configuration:
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The database that user create for address binding.
The address database that system auto learned and blocked.
The IP address.
The MAC address.
The VLAN name (the blocked MAC belongs to).
The state of IP MAC port binding of all the ports.
336