Pbv Attachment; Advanced; Protocol Enable; Protocol Setup - D-Link DAS-3224 User Manual

Broadband access solution

Table of Contents

VID

3.2.6.2

PBV Attachment

This page allows user to attach a bridge port to a PBV group.

Simply choose the specific bridge port and PBV ID, then select Detach or Attach.

This page allows the user to attach certain PBV to any specific bridge ports. Simply select

which bridge port to modify first by choosing the option in the dropdown list. Then, click

"Attach" button to display the attaching page as below. Again, simply use the dropdown list to

select the desired PBV ID to attach and click "Apply" to save the settings.

3.3.1

3.3.1.1

This page allows the user to get a list of all DFC accelerator filter groups as well as enable

different protocols. Click Protocol Setup of Protocol Enable under the Advanced menu to

display the page below.

802.1Q 0x8100 | IPv6 0x86dd | 802.1X 0x888e | 802.1ad 0x88a8 | OAM

0x8902 | Q-in-Q 0x9100 | LLT 0xcafe

VLAN ID. Valid values: 1-4093

Table of Contents

Das-3225