Description
The disable clipaging command disables pausing of the screen display when show command output
reaches the end of the page. The default setting is enabled.
Parameters
None.
Restrictions
You must have administrator privileges.
Example
To disable pausing of the screen display when show command output reaches the end of the page:
D G S - 3 2 0 0 - 1 0 : 4 # d i s a b l e c l i p a g i n g
C o m m a n d : d i s a b l e c l i p a g i n g
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
3-14 enable telnet
Purpose
The switch allows you manage the switch via Telnet based management software.
Use the command to enable Telnet and configure a port number.
Format
enable telnet {<tcp_port_number 1-65535>}
Description
The enable telnet command enables Telnet and configures port number.
Parameters
Parameters
tcp_port_number
Restrictions
You must have administrator privileges.
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
The TCP port number. TCP ports are numbered between 1 and
65535. The "well-known" TCP port for the Telnet protocol is 23.
41