Config Log_Save_Timing; Show Log_Save_Timing - D-Link DGS-3200 SERIES Cli Manual

D G S - 3 2 0 0 - 1 0 : 4 #

8-14 config log_save_timing

Purpose
Used to configure the method to save log.
Format
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]
Description
The config log_save_timing command is used to set the method to save log.
Parameters
Parameters
time_interval
on_demand
log_trigger
Restrictions
You must have administrator privileges.
Notes
The default method is on_demand.
Examples
To configure method to save log as on demand:
D G S - 3 2 0 0 - 1 0 : 4 # config log_save_timing on_demand
Command: config log_save_timing on_demand
Success.
D G S - 3 2 0 0 - 1 0 : 4 #

8-15 show log_save_timing

Purpose
Used to show the method to save log.
Format
show log_save_timing
DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
Description
Save log to flash every xxx minutes. (if no log happen in this
period, don't save)
Save log to flash whener user type "save log" or "save all".
Save log to flash whenever log arrives.
104