Enable 802.1X; Disable 802.1X - D-Link DGS-1100-06/ME Cli Reference Manual

Command
show 802.1x user
delete 802.1x user
config 802.1x capability
ports
config 802.1x fwd_pdu
system
show 802.1x fwd_pdu
system status
Each command is listed in detail, as follows:

enable 802.1x

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable 802.1x switch wide:

disable 802.1x

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable 802.1x on the Switch:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
<username 15>
[<portlist> | all] [authenticator | none]
[enable | disable]
To enable the 802.1x server on the Switch.
enable 802.1x
The enable 802.1x command enables the 802.1x Port-based
Network Access control server application on the Switch.
None.
Only Administrator or operator-level users can issue this command.
DGS-1100-06/ME:5#enable 802.1x
Command: enable 802.1x
Success!
DGS-1100-06/ME:5#
To disable the 802.1x server on the Switch.
disable 802.1x
The disable 802.1x command disables the 802.1x Port-based
Network Access control server application on the Switch.
None.
Only Administrator or operator-level users can issue this command.
DGS-1100-06/ME:5#disable 802.1x
Command: disable 802.1x
174