Create Iproute; Delete Iproute; Show Iproute - D-Link DGS-1210-10 Reference Manual

5 Command Line Interface

create iproute

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add the default static address 10.90.90.92 to the routing table:
DGS-1210-28> create iproute default 10.90.90.92
Command: create iproute default 10.90.90.92
Success.
DGS-1210-28>

delete iproute

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the default Gateway from the routing table:
DGS-1210-28> delete iproute
Command: delete iproute
Success.
DGS-1210-28>

show iproute

Purpose
Used to create IP route entries to the Switch's IP routing table.
create iproute default <ipaddr>
The create iproute command is used to create a default static IP
route entry to the Switch's IP routing table.
default – Specifies to create a default IP route entry.
<ipaddr> − The gateway IP address for the next hop router.
Only Administrator, operator and power user-level users can
issue this command.
Used to delete an IP route entry from the Switch's IP routing
table.
delete iproute {default}
The delete iproute command will delete an existing IP route
entry from the Switch's IP routing table.
{default} – Specifies to delete a default IP route entry.
Only Administrator, operator and power user-level users can
issue this command.
Used to display the Switch's current IP routing table.
98
D-Link Web Smart Switch User Manual