Delete Iproute - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
create iproute [default | <network_address>] [<ipaddr> {<metric 1-65535>} {[primary |
backup | weight <value 1-4>]} | null0 | ip_tunnel <tunnel_name 12>]
Parameters
default - Create an IP default route (0.0.0.0/0).
<network_address> - The IP address and net mask of the destination of the route. The address
and the mask can be set by the traditional format (for example, 10.1.2.3/255.0.0.0) or in CIDR
format (for example,10.1.2.3/16).
<ipaddr> - The IP address for the next hop router.
<metric 1-65535> - (Optional) Enter the metric value here. This value must be between 1 and
65535. The default setting is 1.
primary - (Optional) Specify the route as the primary route to the destination.
backup - (Optional) Specify the route as the backup route to the destination.
weight - (Optional) Specify the weight value of the IP route.
<value 1-4> - Enter the weight value used here. This value must be between 1 and 4.
null0 - Specify the null interface as the next hop.
ip_tunnel – Specify the IP tunnel interface of the next hop.
<tunnel_name 12> - Enter the IP tunnel interface name.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a floating static route:
DGS-3120-24TC:admin# create iproute default 10.1.1.254 primary
Command: create iproute default 10.1.1.254 primary
Success.
DGS-3120-24TC:admin#
87-2

delete iproute

Description
This command is used to delete an IP route entry from the Switch's IP routing table.
Format
delete iproute [default | <network_address>] [<ipaddr> | null0 | ip_tunnel <tunnel_name 12>]
Parameters
default - Deletes an IP default route (0.0.0.0/0).
<network_address> – Specify the network address used.
<ipaddr> - Specify the next hop IP address of the route need to be deleted.
null0 - Specify the null interface as the next hop.
ip_tunnel – Specify the IP tunnel interface of the next hop.
(RI and EI Mode Only)
(RI Mode Only)
(RI Mode Only)
(RI and EI Mode Only)
(RI Mode Only)
(RI Mode Only)
837
(RI and EI Mode Only)