Reboot; Reset Config; Show Boot_File - D-Link DGS-1210-10 Manual

6 Command Line Interface
--- 3000 ::1 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
DGS-1210-52MP>

reboot

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the Switch:
DGS-1210-52MP> reboot
% Device will reboot, please wait a few minutes to re-login.
DGS-1210-52MP>

reset config

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
DGS-1210-52MP> reset config
% Device will reboot after reset configuration successfully.
DGS-1210-52MP>

show boot_file

Purpose
Syntax
Description
To reboot the Switch. If the Switch is a member of a stack, it may
be rebooted individually, without affecting the other members of
the stack.
reboot
The reboot command reboots the system. All network
connections are terminated and the boot code executes.
None.
None.
To reset the Switch to the factory default settings.
reset config
All configurations will be reset to the default settings.
None.
None.
To display the information of the boot file on the Switch.
show boot_file
The show boot_file command displays the current information of
boot file on the switch.
1 4 3
1 4 3
D-Link Smart Managed Switch User Manual