Show Gvrp; Show Gvrp Timer - D-Link DGS-1210/ME series Reference Manual

DGS-1210-28P/ME:5#

show gvrp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP port 5~8 status:
DGS-1210-28P/ME:5# show gvrp 5-8
Command: show gvrp 5-8
Global GVRP : Enable
Port
----
5
6
7
8
Total Entries : 4
DGS-1210-28P/ME:5#

show gvrp timer

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP timer information:
DGS-1210-28P/ME:5# show gvrp timer
Command: show gvrp timer
Garp Timer Info (in milli seconds)
---------------------------------------
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To display the GVRP status for a port list or port channel on the
Switch.
show gvrp {<portlist>}
The show gvrp command displays the GVRP status for a port list or
a port channel on the Switch.
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
None.
PVID GVRP State
---- ----------
1 Enable
1 Enable
1 Enable
1 Enable
To display the GVRP timer information on the Switch.
show gvrp timer
The show gvrp command displays the GVRP timer on the Switch.
None.
None.
Ingress Checking
-----------------------
Enable
Enable
Enable
Enable
230
Acceptable Frame Type
---------------------------------
All Frames
All Frames
All Frames
All Frames