Show Gvrp - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Restrictions
Example usage:
To display the Switch's current VLAN settings:

show gvrp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP port status:
105
None.
DGS3100# show vlan
VID : 1
VLAN TYPE : static
Member ports : 1-24
Static ports : 1-24
Untagged ports : 1-24g
Forbidden ports :
Total Entries : 1
DGS3100#
To display the GVRP status for a port list or port channel on the
Switch.
show gvrp {<portlist> | <ch1-32>}
The show gvrp command displays the GVRP status for a port list or
a port channel on the Switch.
<portlist> − Specifies a port or range of ports for which the GVRP
status is to be displayed.
<ch1-32> − Specifies a port-channel.
None.
DGS3100# show gvrp 1:1-5
Global GVRP : Disabled
Port PVID GVRP
------ ------- ------------- -------------------------- ---------------------------
1:1 1 Disabled Enabled
1:2 1 Disabled Enabled
1:3 1 Disabled Enabled
1:4 1 Disabled Enabled
1:5 1 Disabled Enabled
Total Entries : 5
VLAN Name : default
Ingress Checking Acceptable Frame Type
All Frames
All Frames
All Frames
All Frames
All Frames