Clear Counters - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display Flash utilization:
DGS-3620-28PC:admin#show utilization flash
Command: show utilization flash
Unit 1 Flash Memory Utilization :
Total Flash
Used Flash
Utilization
CTRL+C ESC q Quit
74-6

clear counters

Description
This command is used to clear the switch's statistics counters.
Format
clear counters {ports <portlist>}
Parameters
ports - Specifies a range of ports to be configured. The beginning and end of the port list range
are separated by a dash.
<portlist> - Enter a range of ports to be configured.
Note: If no parameter is specified, the system will clear statistics counters for all ports.
Restrictions
Only Administrators and Operators can issue this command.
Example
To clear the switch's statistics counters for ports 1:7 to 1:9:
DGS-3620-28PC:admin#clear counters ports 1:7-1:9
Command: clear counters ports 1:7-1:9
Success.
DGS-3620-28PC:admin#
: 126253 KB
: 8271 KB
: 6 %
SPACE n Next Page p Previous Page r Refresh
850