Show Error Ports; Clear Counters - D-Link DGS-1100-16/ME Reference Manual

show error ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the errors of port 5:

clear counters

Purpose
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-24P/ME:admin#show packet ports 5
Command : show packet ports 5
Port Number : 5
Frame Type Total
-------------------- -----------
RX Frames 2416
TX Frames 4126
DGS-1100-24P/ME:admin#
To display the error statistics for a port or a range of ports.
show error ports <portlist>
The show error ports command displays all of the packet error
statistics collected and logged by the Switch for a given port list.
<portlist> − A port or range of ports whose error statistics are to be
displayed.
None.
DGS-1100-24P/ME:admin#show error ports 5
Command : show error ports 5
Port Number : 5
RX Frames
-------------------------
Alignment Error
FCS Error
False Carrier
Length Out of Range 0
Fragment
Jabber 0
MTU Check Error
Oversized
RUNT Byte
RUNT Frame
DGS-1100-24P/ME:admin#
To clear the Switch's statistics counters.
TX Frames
----------------------
0 FCS Error
0 Jabber
0 Late Collision
Multiple Collision
0 Total Collision
Oversize Packet
0 Single Collision
0 Excessive Collision 0
0
0
53
0
0
0
0
0
0
0