Tools Supplied By Service Personnel; Optional Kits; Edge Switch 2/32 Optional Kits - HP 316095-B21 Installation Manual

Edge switch 2/32
Hide thumbs Also See for 316095-B21:
Table of Contents

Advertisement

Tools supplied by service personnel

The following tools are expected to be supplied by service personnel performing Edge Switch
installation or maintenance actions. Use of the tools may be required to perform one or more test,
service, or verification tasks.
Scissors or pocket knife—A sharp cutting edge may be required to cut the protective strapping
when unpacking replacement FRUs.
Standard flat-tip and cross-tip (Phillips) screwdrivers—Screwdrivers are required to remove,
replace, adjust, or tighten various FRUs, chassis, or cabinet components.
Electrostatic discharge (ESD) grounding cable with attached wrist strap—Use of the ESD wrist
strap is required when working in and around the Edge Switch card cage.
Maintenance terminal (desktop or notebook PC)—A PC is required to configure Edge Switch
network addresses and acquire event log information through the maintenance port. The PC
must have:
• The Microsoft
Millennium Edition operating system installed.
• RS-232 serial communication software (such as ProComm Plus or HyperTerminal) installed.
HyperTerminal is provided with Windows operating systems.
Fiber-optic cleaning kit—The kit contains tools and instructions to clean fiber optic cable,
connectors, loopback plugs, and protective plugs.

Optional kits

Contact your HP-authorized service provider to purchase optional Edge Switch 2/32 kits described
in
Table
2.
Table 2

Edge Switch 2/32 optional kits

Supporting Kit
8-flexport upgrade for the
Edge Switch 2/32
Part Number: 302660-B21
Edge Switch 2/32 Element Manager license
Part Number: 300658-B21
HP Open Trunking license
Part Number: 336000-B21
HP SANtegrity Binding license
Part Number: 317071-B21
300m Optical Transceiver Kit
Part Number: 300834-B21
Windows
98, Windows 2000, Windows Server 2003, Windows
®
®
Description
Used to upgrade the Edge Switch from:
16 to 24 ports
24 to 32 ports
Used when switch is managed through
HAFM
Provides a license to use the Open Trunking
feature
Provides a license to use the SANtegrity
Binding feature
Provides short-wave optical transceiver for
the Edge Switch 2/32
Edge Switch 2/32 installation guide
XP, or
®
21

Advertisement

Table of Contents
loading

Table of Contents