Performance View; Node List View - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Product Manager Overview
Figure 7: Node List View
Note that these options are also available when you click a port row, then select
the Port secondary menu from the Product tab on the menu bar.
For details on navigating and monitoring via the Node List View, refer to
List

Performance View

Select the Performance view tab.
View. This view provides a graphical display of performance for all 24 ports. The
top portion of the Performance View displays bar graphs that show the level of
transmit/receive activity for each port. This information updates every five
seconds. Each bar graph also shows the percentage link utilization for the port. A
red arrow marks the highest utilization level reached since the Performance View
was opened. If the system detects activity on a port, it represents minimal activity
with at least one bar.
When an end device (node) is logged into a port, moving the cursor over the port's
bar graph in the Performance View highlights the graph and displays a message
with the worldwide name of the connected node. If the connected node has more
than one port, this is the worldwide name of the specific port on the node. When a
port is functioning as an expansion port (E_Port), the message is E_Port. When
a port is not logged into an end-device (not functioning as an F_Port) or to another
switch (not functioning as an E_Port), the message is the port's current online
state.
46
View" on page 45.
Figure 8 shows an example of the Performance
Edge Switch 2/24 Product Manager User Guide
"Node