Self Test - Setup Test - R&S AFQ100A Operating Manual

R&S AFQ100A

Self Test - Setup Test

A self test is provided for service purposes. The self test is a protected test procedure, which can be
accessed if protection level 1 is disabled. The protection dialog is called in the Setup menu (see
Protection - Setup, on page 4.98).
The Self test dialog can be selected in the Test section of the Setup menu.
Note:
The Self test is provided for service purposes and therefore described in chapter 1 of the service
manual, section Test Procedures.
1401.3084.32
General Instrument Settings
4.92 E-3