R&S AFQ100A
The configuration of the R&S AFQ for networking is performed in the Windows XP menus. The
operating system can only be accessed if an external keyboard and/or mouse and a external monitor
are connected. Operation by mouse only without the external keyboard is possible if the on-screen
keyboard is used. To ensure recognition of the external devices, the instrument has to be switched off
prior to connecting them.
1.
Switch off instrument
2.
Connect external keyboard and/or mouse and external monitor to the USB interface.
3.
Switch on instrument
1.
Open the start menu (either by pressing the Windows key (on the keyboard next to the
by moving the mouse to the bottom of the display and subsequent clicking on Start).
2.
Click on Control Panel and then Network and Internet Connections.
1401.3078.62
Connecting the R&S AFQ to a Network (LAN)
1.27
key) or
Ctrl
E-3