R&S AFQ100A Operating Manual page 58

R&S AFQ100A
4. Login data can be stored with the Save As button.
If the login data is stored as a default.rdp file, the connection to the R&S AFQ is offered as the
default when the program is started. If the data is stored under another name, the R&S AFQ link is
available in the selection list opened with the
5. Enter remote desktop size 800 x 600 in the Display tab.
6. The connection is established when the Connect button is pressed.
After the connection is established, the modulation generator screen with the block diagram is displayed
and the R&S AFQ can be manually remote-controlled from the external PC.
The individual functions are operated using the mouse and keyboard. Specific instrument functions can
be executed using specific key combinations on the keyboard (see table in chapter 3, section
of Manual Controls" on page 3.1).
The device firmware of the R&S AFQ is disabled when the connection is set up. Direct control on the
R&S AFQ is not possible while manual remote-control is active. The access of an external PC is
indicated by the logon screen of Windows XP which identifies the accessing user.
If several R&S AFQ instruments are to be manually remote-controlled from one PC, a separate Remote
Desktop Control window must be opened for each R&S AFQ. This is possible by starting the program
on the external PC several times.
1401.3078.62
Manual Remote Control via an External Controller
button of the Computer: entry field.
1.38
"Legend
E-3