R&S AFQ100A Operating Manual page 31

R&S AFQ100A
9 Next
NEXT
10 Trigger input
TRIG
11 Clock signal input/output
CLOCK IN, OUT
IN
OUT
12 Reference clock signal input/output
REF IN, OUT
IN
OUT
1401.3078.62
This trigger input indicates the next (i.e. the 2nd, 3rd,
4th, ...) segment of a multi segment waveform, which
can be a compound of e.g. a sine, a rectangular, and
a sawtooth signal.
The output of the stored waveform can be triggered
with a TTL signal applied to this connector. Trigger
condition and polarity are user-selectable. The
termination impedance is either 0,05 or 1 kOhm.
Input for external clock.
Output with current memory clock rate..
Input for external 10 MHz reference clock.
Output of internal 10 MHz reference clock.
Legend for Rear Panel View
1.11
See data sheet and
"Trigger Dialog"
See data sheet and
"Trigger Dialog"
See data sheet and
"Clock Dialog"
See data sheet and
"Clock Dialog"
E-3