Selecting A Control Element - Setting Parameters; Switching Parameters On/Off - Setting Parameters - R&S AFQ100A Operating Manual

R&S AFQ100A

Selecting a Control Element - Setting Parameters

Control elements are always selected in the same way no matter whether a function block in the
diagram, a menu in the menu tree, a parameter in the dialog or an entry in a list or table is concerned.
An element is activated by means of the cursor. An active element is highlighted by a blue frame.
Function
Selects an element

Switching Parameters On/Off - Setting Parameters

A parameter can be activated and deactivated using a button or a check box.
The Enter function of the different control media switches the highlighted element on or off (toggle
function). Colour and label of a button change, the check box is ticked or the tick is removed.
Function
Switches on/off
1401.3078.62
PC keyboard
Select element by means of the cursor
keys.
PC keyboard
Press the Enter key.
3.17
Setting Parameters
Mouse
Click on the element.
Mouse
Click on the check box or the button.
E-3