Analog Outputs - R&S AFQ100A Operating Manual

R&S AFQ100A
7

Analog outputs

Analog I/Q output (inverting and non inverting):
8 Hard disk
Slot for removable hard disk.
With respect to security concerns the hard disk can be
removed from the instrument, but it is bound to the
specific R&S AFQ. Therefore it cannot be changed
between different instruments.
NOTICE Risk of instrument damage and data loss!
During operation the instrument is accessing the hard disk. Removing the hard disk
while operating will lead to data loss or even instrument damage.
Do not remove the hard disk during operation.
1401.3078.62
The loaded waveforms are output at a nominal level
of 0.5 Volts at two BNC connectors I and Q. The
impedance amounts to 50 Ohm. Four BNC
connectors I and I BAR, Q and Q BAR are available
for differential output.
1.6
Putting into Operation
See data sheet
E-3