R&S AFQ100A Operating Manual page 339

R&S AFQ100A
In the example below, the current instrument setting is always stored in the file 'test1.savrcl' in
the directory 'user' on the internal hard disk.
*SAV 4
MMEM:STOR:STAT 4,"d:\user\test1.savrcl"
If the complete path including the drive letter is specified, the file is stored in the specified
path.
MMEM:MSIS 'd:'
*SAV 4
MMEM:STOR:STAT 4,"\user\test1.savrcl"
If the parameter only contains the path and file name, the default drive set with the
MMEM:MSIS command is effective.
MMEM:MSIS 'd:\'
MMEM:CDIR 'user'
*SAV 4
MMEM:STOR:STAT 4,"test1.savrcl"
If the parameter only contains the file name, the file is stored on the default drive
MMEM:MSIS and in the default directory which was selected with the MMEM:CDIR
command.
Table 6-1 List of file extensions assigned automatically in Instrument
List type
Instrument State
Instrument State
Arbitrary Waveform Generator
Waveform, Multi segment waveform
Multi Segment Configuration
Equalizer List
I/Q
Modulator
Mass Memory - Command Table
Command
MMEMory:CATalog?
MMEMory:CATalog:LENGth?
MMEMory:CDIRectory
MMEMory:COPY
MMEMory:DATA
MMEMory:DCATalog?
MMEMory:DCATalog:LENGth?
MMEMory:LOAD:STATe
MMEMory:DELete
MMEMory:MDIRectory
MMEMory:MOVE
MMEMory:MSIS
MMEMory:RDIRectory
MMEMory:STORe:STATe
1401.3084.32
Contents
Instrument settings
ARB waveforms
Configuration information for multi segment waveforms.
These files are loadable (readable) only.
Data the instrument uses for correction.
Data the instrument uses for correction.
Parameters
<path>
<directory_name>
<file_name>,<file_name>
<file_name>[,<block>]
<number>,<file_name>
<file_name>
<directory_name>
<file_name>,<file_name>
<msus>
<directory_name>
<number>,<file_name>
6.78
AFQ Commands - Setup Section
Default unit
File suffix
*.savrcl
*.wv
*.inf_mswv
*.dm_iqd
*.dm_iqc
Remark
Query only
Query only
No query
No query
No query
Query only
Query only
No query
No query
No query
No query
No query
No query
No query
E-3