Gpib - Setup Remote - R&S AFQ100A Operating Manual

R&S AFQ100A

GPIB - Setup Remote

The Remote Channel Settings dialog provides access to the GPIB and Ethernet settings. The GPIB
dialog can be selected in the Remote section of the Setup menu.
GPIB channel address
Visa Resource String
Local
1401.3084.32
Sets the IEC/IEEE bus address of the instrument.
Remote-control command:
SYST:COMM:GPIB:ADDR 28
Indicates the visa resource string. This string is used for remote
control of the instrument. A separate string is provided for remote
control via the LAN and the USB interface
Remote-control commands:
SYST:COMM:USB:RES?
Response:
USB::0x0031::100001::INSTR
Switches the instrument to operate in local control mode.
Switching from remote to local control mode can be also done with
one of the following actions:
with the interface command &GTL via the remote-control interface
with the key combination
Remote-control command: n.a.
4.97
General Instrument Settings
CTRL + Q
E-3