R&S AFQ100A Operating Manual page 30

R&S AFQ100A
5 Monitor
MONITOR ANALOG
6 USB connectors type A
USB 2, 1
7 USB interface type B
IN
8 Marker (1-4)
MARKER 1-4
1401.3078.62
The 15-pin Sub-D female connector is intended for
connecting an external VGA monitor with an analog
input.
One USB 2.0 (universal serial bus) and one USB 1.1
interface of type A (host USB)
Connection of peripherals such as mouse and
keyboard
Connection of memory stick for file transmission
Firmware update
The interface establishes a connection to the
controller.
One USB 2.0 (universal serial bus) interface of type
B, hence the instrument is assigned as device, not
as host. This connector may be used for remote
controlling the instrument.
R&S AFQ provides four marker outputs for triggering
and controlling external devices. The marker signals
are either contained in the waveform or are user
defined in the Marker dialog.
Legend for Rear Panel View
1.10
See data sheet and
section "Connecting
an External Monitor"
on page 1.24
See section
"Connecting a
Mouse" on page 1.23
and section
"Connecting an
External Keyboard"
on page 1.23
See data sheet
See data sheet and
"Marker Dialog"
E-3