Reset Values Of The Status Reporting Systems - R&S AFQ100A Operating Manual

R&S AFQ100A

Reset Values of the Status Reporting Systems

Commands ,
*RST *DCL
reporting system. None of the commands, except for *RST and SYSTem:PRESet influences the
functional instrument settings. In particular, DCL does not change the instrument settings.
Table 5-4 Resetting the Status Reporting System
Event
Effect
Clear STB,ESR
Clear SRE,ESE
Clear PPE
Clear error-queue
Clear output buffer
Clear command processing
and input buffer
Table 5-5 Resetting the Status Reporting System
1) Every command being the first in a command line, i.e. immediately following a <PROGRAM MESSAGE TERMINATOR>
clears the output buffer
1401.3084.32
and and switching on the supply voltage also affect the status
SYSTem:PRESet
Switching on
supply voltage
DCL,SDC
Power-On-Status- (Device Clear,
Clear Selected Device
Clear)
0 1
– yes
– yes
– yes
yes yes
yes yes
yes yes
Status Reporting System
*RST or
SYSTem:PRESet
– –
– –
– –
– –
yes 1)
yes –
5.31
STATus:PRESet *CLS
– yes
– –
– –
– yes
1) 1)
– –
E-3