Arb - Sine Test Signals Dialog - R&S AFQ100A Operating Manual

R&S AFQ100A
Sine Testsignals...
Rect Testsignals...
Table Sine
Testsignals...
Test Pattern...

ARB - Sine Test Signals Dialog

The Sine Test Signals dialog is accessed via the ARB dialog.
The dialog can be used to configure a sinusoidal test signal. A sine wave is always generated on the I
path, and a sine wave of the same frequency but phase-shifted is generated on the Q path. The
instrument cannot create test signals remote controlled via IEC bus, hence the user is required to use
the graphical user interface displayed on a monitor.
1401.3084.32
Opens the dialog for creating the sine test signals
Signals" on page 4.5.
Opens the dialog for creating the test signals
Signals" on page 4.7.
Opens the dialog for creating the test signals
Signal" on page 4.8.
Opens the dialog for creating test signals
page 4.11.
4.5
Baseband Block
"ARB - Sine Test
"ARB - Rectangular Test
"ARB - Table Sine Test
"ARB - Test Pattern" on
E-3