R&S AFQ100A Operating Manual page 92

R&S AFQ100A
This section describes the dialog structure. Dialog operation is described in section
on page 3.20, the setting of parameters in section
The dialogs are in Windows format. They differ in details depending on their function but they consist of
the same main elements.
The remaining dialog area is variable and comprises various fields for setting parameters.
Each of the setting fields is assigned a parameter name. The kind of setting varies depending on the
parameter to be set.
1401.3078.62
"Setting Parameters" on page 3.16.
Dialog header
The header line contains the name of the dialog
and the buttons for minimizing
the dialog. The buttons can be operated with the
mouse. For operation from the external key board,
the key combnation
character, the cursor keys and the
used.
Entry field
A numeric value (e.g. frequency) or an alpha-
numeric value (e.g. file name) can be entered in
this field.
Selection field
The button indicates that a selection can be
made from a list. The fold-down selection list is
displayed below the selection field. Depending on
the number of entries, the full list or only part of it is
shown.
One entry at a time can be selected from the list.
If an item is not available for selection, it is printed
in grey and cannot be accessed.
Units
The unit of a parameter is displayed next to the
value. When the parameter is edited, the unit is
selected either from the list or by means of the
front-panel keys. When the entry is completed, the
unit can be changed. In this case the value
remains unchanged but is automatically adapted to
the new unit.
3.14
Display
"Dialog Operation"
and closing
+ ... the underscored
Alt
key can be
Esc
E-3