Terminating Entries - Setting Parameters; Restoring The Previous Value - Setting Parameters - R&S AFQ100A Operating Manual

R&S AFQ100A

Terminating Entries - Setting Parameters

Variations by means of the cursor keys are immediately set, e.g. delay settings.
All other parameter settings have to be confirmed by a pressing the
combinations.
Some settings require additional confirmation. This is the case when it is useful to first enter a few
values and to confirm them together.
All settings of instrument functions that can be switched on and off are calculated and effective only
after this function has been switched on.
Function
Accepts value immediately
Confirms entries
Confirms entries in the dialogs with
the Accept button.
Sets the entries in the instrument

Restoring the Previous Value - Setting Parameters

Parameter variations with the cursor keys are immediately set and therefore not reversible.
Normally, values cannot be restored also in the case of mouse control because no explicit confirmation
is required in this case and entries are automatically confirmed when the entry or selection field is
exited.
1401.3078.62
PC keyboard
Vary the value with the up/down cursor
keys.
Press the Enter key
or one of the key combinations
Alt + F9 / + F10 / + F11 / + F12 .
Select Accept button with the cursor
keys and press Enter .
If the instrument function is active, the
new value is immediately calculated and
set.
If the instrument function is not active,
the new, confirmed value is calculated
and set only when the function is
switched on.
3.19
Setting Parameters
key or one of the unit key
Enter
Mouse
-
Exit entry field.
Click on Accept button.
(see keyboard)
E-3