Security - Setup Security - R&S AFQ100A Operating Manual

R&S AFQ100A

Security - Setup Security

The Security... dialog provides access to the passwords and mass storage security settings. It is
opened by selecting the menu item Security in the Setup menu.
The menu is divided into the Change Security Password section and the Security Settings section. In
the password section the passwords for securing a controlled access to the instrument are defined and
changed. In the security section the remote interfaces are enabled and disabled.
A change of passwords for the operating system and security password requires the entry of the old
and new password and the conformation of the new password. All settings are only accepted after the
Accept button is pressed.
Old password
New Password
Confirm New
Password
1401.3084.32
Enters the currently used password. Default is '123456'.
Remote-control commands: n.a.
Enters the new password.
Remote-control commands: n.a.
Enters the new password for conformation.
The new password is only valid after the Change Password button is
pressed.
Remote-control commands: n.a.
4.99
General Instrument Settings
E-3