R&S AFQ100A
Protection - Setup Protection
The dialog Protection can be started in the Protection section of the Setup menu.
The Protection dialog provides access to the unlocking of protected service functions (authorized
personnel of R&S Service Departments only). The correct password is required to deactivate the
protection levels. After the instrument has been switched on, the protection levels 1 to 5 are active (On).
If the instrument is equipped with the software option R&S AFQ-K0, Protection level 1 is always
deactivated.
Note:
Protection Level 1 can be deactivated to access the self test. The password is 123456.
The Self Test is provided for service purposes and therefore described in chapter 3 of the service
manual, section Trouble Shooting.
Remote-control command:
SYST:PROT1:STAT ON
SYST:PROT1:STAT OFF, 123456
1401.3084.32
General Instrument Settings
4.98
E-3