R&S AFQ100A
Frequency Entry Mode
RF Frequency
Editing Modulator Data
1401.3084.32
Selects the frequency entry mode. The frequency correction is
performed for a bandwidth of 200 MHz centred on the RF carrier.
Frequency values given in the table are interpreted as
Relative
relative to the carrier frequency. Negative frequency
values are possible.
Remote-control command:
SOUR:EQU:MOD:FEM REL
Frequency values given in the table are interpreted as
Absolute
absolute values. The carrier frequency must be
entered in the RF frequency field. The allowed range
is 200 MHz centred on the RF carrier.
Remote-control command:
SOUR:EQU:MOD:FEM ABS
(Frequency entry mode absolute only)
Enters the RF carrier frequency.
Remote-control command:
SOUR:EQU:MOD:RFFR 1.4 GHZ
4.48
Equalizer Block
E-3