R&S AFQ100A
Select Test Point -
Analog Output Board
Voltage Test Point -
Analog Output Board
Fan Speed Control
1401.3084.32
Calls the dialog for selecting the test point on the analog output board.
The currently selected key is shown next to the Select button.
Remote-control commands:
DIAG:AOUT:POIN:CAT?
Response: list of the available test points.
DIAG:AOUT:POIN? 'DIAG_AUX1'
(With remote control, voltage measurement starts as soon as the test
point is selected.)
Displays the measured voltage measurement at the selected test point
on the analog output board.
Remote-control command:
DIAG:AOUT:POIN? 'DIAG_N12V
Response:
2
Sets the fan speed.
Default setting for fan speed
Auto
Remote-control command:
DIAG:FCON AUTO
Full speed mode provided for service purposes.
Full Speed
Remote-control command:
DIAG:FCON FSP
4.95
General Instrument Settings
E-3