System Subsystem - R&S AFQ100A Operating Manual

R&S AFQ100A

System Subsystem

The SYSTem subsystem contains a series of commands for general functions which do not directly
affect signal generation.
Command
SYSTem:COMMunicate:GPIB:LTERminator
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
SYSTem:COMMunicate:USB:RESource
SYSTem:DATE
SYSTem:DISPlay:UPDate
SYSTem:ERRor:ALL?
SYSTem:ERRor:CODE:ALL?
SYSTem:ERRor:CODE[:NEXT]?
SYSTem:ERRor:COUNt?
SYSTem:ERRor[:NEXT]?
SYSTem:FPReset
SYSTem:PRESet
SYSTem:PROTect<n>[:STATe]
SYSTem:SECurity[:STATe]
SYSTem:SERRor?
SYSTem:STARtup:COMPlete?
SYSTem:TIME
SYSTem:VERSion?
System - GPIB Terminator
SYSTem:COMMunicate:GPIB:LTERminator EOI | STANdard
The command sets the terminator recognition for remote control via the IEC/IEEE bus.
EOI
Parameters:
STANdard
Example: SYST:COMM:GPIB:LTER EOI
*RST value
STANdard
1401.3084.32
The terminator must be sent together with the line message EOI (End of Line).
This setting is recommended for binary block transmissions where a character
could coincidentally have the value LF (Line Feed) but is not intended as the
terminator. This setting must be selected for block data with undefined length.
An LF (Line Feed) is recognized as the terminator regardless of whether it is
sent with or without EOI.
'only a character which is sent simultaneously with the line message EOI is
accepted as the terminator.
Resolution Options
-
AFQ Commands - Setup Section
Parameters
EOI | STANdard
0...30
<year>,<month>,<day>
ON | OFF
ON | OFF , password
ON | OFF
<hour>,<minute>,<second>
SCPI
Compliant
6.90
Default Remark
unit
Query only
No query
No query
Query only
Query only
Query only
Query only
Query only
No query
No query
No query
No query
Query only
Query only
No query
Query only
E-3