R&S AFQ100A Operating Manual page 311

R&S AFQ100A
[SOURce:]EQUalizer:IQ:I:PHASe -360 ... +360 deg
This command enters phase values into the current data table of the I path.
The command triggers an event and therefore has no query form and no *RST value.
Example: EQU:IQ:I:PHAS 0,-5,-10
*RST value
-
[SOURce:]EQUalizer:IQ:I:POINts?
This command queries the number of data points of the current data table of the I path, i.e. the
number of filled rows.
The command is a query command and therefore has no *RST value.
Example: EQU:IQ:I:SEL "D:/TEMP/TESTPREDIQ"
EQU:IQ:I:POIN?
Response: 5
*RST value
-
[SOURce:]EQUalizer:IQ:I:SELect <FILE NAME>
This command loads the specified file containing a data table for the I path. All new data points will
be saved in the selected file, hence there is no 'save' or 'save as...' command. If the specified file
does not exist, the instrument will create a new one, assigning the entered file name.
If no directory is specified, the default directory selected with the MMEM:CDIR command is read out
on the default drive selected with the MMEM:MSIS command.
The command triggers an event and therefore has no query form and no *RST value.
Example: EQU:IQ:I:SEL 'corr_i1'
*RST value
-
1401.3084.32
'writes three gain values into the current data table.
Resolution Options
0.01 deg
'selects the data table.
'queries the number of data points of the current data table.
Resolution Options
-
'selects a file containing a data table previously entered by the user.
Resolution Options
-
AFQ Commands - Signal Generation
6.50
SCPI
Device-specific
SCPI
Device-specific
SCPI
Device-specific
E-3