R&S AFQ100A Operating Manual page 340

R&S AFQ100A
MMEMory:CATalog? <path>
This command reads out the subdirectories and files in the specified directory. If no directory is
specified, the default directory selected with the MMEM:CDIR command is read out on the default
drive selected with the MMEM:MSIS command.
The response has the following format:
<used_bytes_in_this_directory>,<free_bytes_on_this_disk>,
"<file_name>,<file_type>,<filesize_in_bytes>",
"<file_name>,<file_type>,<filesize_in_bytes>", ...
The command is a query command and therefore has no *RST value.
<file_name>
Parameters:
<file_type>
<filesize_in_bytes>
Example: MMEM:CAT? '\\Server\DATA\*.LOG'
MMEM:CAT? 'd:\user'
Response:
"127145265,175325184,"test,DIR,0","temp,DIR,0","readme.txt,ASC,1324","state.
*RST value
-
1401.3084.32
File or directory name
File type. There are the following file types: DIR (directory), ASCii (ASCII file),
BINary (Binary file), and STATe (file with instrument settings).
File size. The size "0" is returned for a directory.
'reads back all files in \\Server\DATA with the extension ".LOG".
'reads out all files at the highest directory level of the memory stick.
savracl,STAT,5327","waveform.wv,BIN,2342"
'the directory D:\User contains the subdirectories 'test' and 'temp' as
well as the files 'readme.txt', 'state.savrcl' and 'waveform.wv'
which have different file types.
Resolution Options
-
AFQ Commands - Setup Section
SCPI
Compliant
6.79 E-3