Update - Setup System - R&S AFQ100A Operating Manual

R&S AFQ100A

Update - Setup System

The Update dialog can be selected in the System section of the Setup menu.
After a firmware update it is occasionally required to update the PCI-FPGA also. This is enabled in the
Update dialog.
At the first start of the new firmware a message appears during the boot process when a PCI-FPGA
update is required. The PCI-FPGA update starts by pressing the PCI-FPGA button.
Functions of the instrument may be impaired!
NOTICE
Disrupting the update of the PCI-FPGA may impair instrument functions.
The update of the PCI-FPGA must not be cancelled and the instrument must not be
switched off during this update.
1401.3084.32
General Instrument Settings
4.91 E-3