R&S AFQ100A Operating Manual page 115

R&S AFQ100A
Load Waveform
1401.3084.32
Calls the dialog for loading a waveform file..
The files last used are listed in the Recent Data Sets section on top of
the dialog.
The directory can be selected down to the left.
Waveform files are stored with the predefined file extension *.wv.
Available waveform files in the selected directory are listed on the
right.
File information on the selected file is displayed below, e.g. tag
contents, multi segment state, or clock rate.
The Select... button selects the marked file. This file is loaded when
the ARB modulation is enabled (State On).
The File Manager... button leads to the file manager which may be
used to look for a file.
File name and crest factor of the loaded waveform are indicated in the
status bar of the display.
Remote-control commands:
SOUR:WAV:SEL 'SineTriRectMarker',
if the file is stored in the default directory.
and
SOUR:WAV:SEL 'd:\user\SineTriRectMarker',
if the file is in a different directory.
4.4
Baseband Block
E-3