R&S AFQ100A
Starting the Measurement & Automation program for remote control of the R&S AFQ
1.
Start the program on the controller
2.
In the Configuration window, open Instruments and Interfaces and select R&S AFQ (= Alias)
under VISA Ethernet Devices.
3.
Open the menu by clicking on Open VISA Session with the right mouse key.
On the viWrite tab under Basic I/O commands can be sent to the instrument. Instrument
responses are displayed on the viRead tab (for further program operation refer to the online help of
the program).
1401.3084.32
Switchover to Remote Control
5.12
E-3