Bit Error Rate Dialog - R&S AFQ100A Operating Manual

R&S AFQ100A

Bit Error Rate Dialog

The Bit Error Rate dialog for configuring the bit error rate measurement is called either in the BERT
function block of the main window or by selecting BERT in the Edit menu.
The Bit Error Rate dialog is divided into the following sections:
1401.3084.32
Bit Error Rate Measurements - BERT Block
The top section indicates if the bit error rate
measurement is active and displays the results
and current status of the measurement.
The Configuration section is used to select the
type of measurement, the data source and the
termination criteria.
If the data is not cyclically continued, the
measurement can be selectively interrupted and
restarted. Certain data sections and frames that
have been marked as faulty can be excluded
from the measurement.
4.70 E-3