R&S AFQ100A Operating Manual page 314

R&S AFQ100A
[SOURce:]EQUalizer:MODulator:CATalog?
This command lists all files containing equalizer data tables for the modulator saved on local hard
disk. The default directory is set using command MMEM:CDIRectory.
The command is a query command and therefore has no *RST value.
Example:
MMEM:CDIR 'd:/user/Equalizer'
EQU:MOD:CAT?
*RST value
-
[SOURce:]EQUalizer:MODulator:DELete <FILE NAME>
This command deletes an equalizer data table for the modulator from local hard disk.
The command triggers an event and therefore has no query form and no *RST value.
Example: EQU:MOD:SEL "test_mod"
EQU:MOD:DEL "test_mod"
*RST value
-
[SOURce:]EQUalizer:MODulator:FEMode ABSolute | RELative
This command determines whether frequency values are absolute or relative with respect to the RF
carrier frequency.
Example: EQU:MOD:FEM REL
*RST value
ABSolute
[SOURce:]EQUalizer:MODulator:FREQuency 0 ... 1 GHz
This command enters frequency values into the current equalizer data table of the modulator.
Example: EQU:MOD:FREQ 10000,20000,30000
*RST value
-
1401.3084.32
'sets the default directory
'lists all files containing equalizer data tables for the modulator.
Resolution Options
-
'selects the file 'test_mod.afq_mfg' to be deleted.
'deletes the file 'test_mod.afq_mfg' from HD.
Resolution Options
-
'frequency is given relative to the RF carrier frequency.
Resolution Options
'enters three requency values into the current data table.
Resolution Options
1 Hz
AFQ Commands - Signal Generation
6.53
SCPI
Device-specific
SCPI
Device-specific
SCPI
Device-specific
SCPI
Device-specific
E-3