R&S AFQ100A Operating Manual page 341

R&S AFQ100A
MMEMory:CATalog:LENGth? <path>
This command reads out the number of files in the specified directory. If no directory is specified, the
default directory selected with the MMEM:CDIR command is read out on the default drive selected
with the MMEM:MSIS command.
The command is a query command and therefore has no *RST value.
Example: MMEM:CAT:LENG? 'e:\
Response: '1'
*RST value
-
MMEMory:CDIRectory <directory_name>
This command changes the default directory. This directory is used for all subsequent MMEM
commands if no path is specified with them. It is also possible to change to a higher directory using
two dots '..' .
Example: MMEM:CDIR 'test'
*RST value
D:\
MMEMory:COPY <source>,<destination>
This command copies the first specified file to the second specified file. Instead of just a file, this
command can also be used to copy a complete directory together with all its files.
If <destination> is not specified, <source> is copied to the MMEM:MSIS drive and the MMEM:CDIR
directory. Files which already exist with the same name in the destination directory are overwritten
without an error message.
It is also possible to specify the path using another parameter. The command is:
MMEMory:COPY <file_source><msus_source>[,<file_destination>,<msus_destination>]
The command triggers an event and therefore has no query form and no *RST value.
Example: MMEM:COPY 'D:\USER\TEST1.SAVRCL','E:'
*RST value
-
1401.3084.32
'reads out the number of files at the highest directory level of the memory
stick.
'there is 1 file at the highest directory level of the memory stick.
Resolution Options
-
'changes from the current directory level to the subdirectory 'test'.
Resolution Options
-
'copies the file 'test1.savrcl' in the USER directory on the internal hard
disk to the memory stick without changing the file name.
Resolution Options
-
AFQ Commands - Setup Section
SCPI
Device-specific
SCPI
Compliant
SCPI
Compliant
6.80 E-3